Oven would not start

ApplianceGeneral Electric Range

Model

Level of DifficultyA Bit Difficult

Time to do repair1- 2 hours

Age of ApplianceMore than 10 years

Tools Nutdriver
Socket set

Gregory From Redondo Beach, CA

Jul 17, 2012

Removed the oven door and bottom drawer. Removed the oven floor. The igniter bracket was angled in such a way that I had to remove a good deal of the metal thermal shielding underneath the burner element in order to access the bolts on the igniter bracket. Removed the igniter bracket and old igniter. Removed the old igniter from the bracket. Attached the new igniter to the igniter bracket. Snipped the wires attached to the old igniter leaving enough old wire intact to splice in the new igniter. Spliced the new igniter onto the old wiring. Attached the igniter and bracket back on the burner element. Replaced the thermal shielding. Tested igniter operation. Replaced oven floor. Replaced bottom drawer and oven door.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Round Style Oven Igniter

Part Number: PS243425

$67.93
In Stock