Loud squeal when washing with cold water

ApplianceWhirlpool Washer

Model

Level of DifficultyEasy

Time to do repair15 - 30 mins

Age of ApplianceMore than 10 years

Tools Nutdriver
Pliers

Andrew From Ashland, AL

Jun 26, 2012

Turned off the water and power, disconnected the supply hoses. Then took out the two screws in the control panel. Removed the clips holding the back to the main tub assembly. Marked the hot/cold control wires on the valve assembly, then removed them. Pushed back the internal water hose clamp (watch out for water in the line). Unscrewed the old valve assembly and bolted in the new one. Replaced the control wires and internal water hose and clamp. Replaced the clips holding the back to the tub and the screws to the control panel. Replaced the supply hoses and power cord.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Water Inlet Valve with Mounting Bracket

Part Number: PS334646

$15.44
In Stock