The plastic cup that interfaces with the ice dispenser drive screw breaks if the auger gets jammed

ApplianceGeneral Electric Refrigerator


Level of DifficultyEasy

Time to do repair15 - 30 mins

Age of Appliance5 - 10 years

Tools Pliers
Screw drivers

Shawn From Powell, OH

Jun 19, 2012

Remove the ice bin from the freezer, and empty the ice from it. Remove two screws on each side of the bin to remove the bottom cover. Remove the screw from the ice door actuator shaft, then disengage it from the ice door. Turn over the bin, and using two flat-blade screw drivers, gently pry apart the tapered end of the bin, freeing the tabs. Pull out the assembly, take note of the ice crushing assembly, remove the broken plastic cup, and replace with the new part. Place the cup-end of the auger in to the bin, then snap the tapered end back in to the bin, taking care that the ice crushing mechanism is re-installed correctly. Reverse the disassembly instructions to assemble.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Ice Dispensing Drive Cup

Part Number: PS964134

In Stock