Pantry cover hinge broke

ApplianceAmana Refrigerator


Level of DifficultyEasy

Time to do repair15 - 30 mins

Age of Appliance5 - 10 years

Tools Nutdriver

Daniel From Caldwell, ID

Jun 19, 2012

Repair was helped by reading what others shared with similar issue helped a lot. First remove all bins and glass pane. Use the nut driver to remove three screws that hold the pantry. Be careful while removing it from refrigerator. There a an vent control that clips onto back side of refrigerator and attaches to pantry end cap. Remove this piece, be careful as not to break it. This piece ( the guts) attaches to the slide piece that attaches to the controller, remove carefully by turning it to align the slot tab. Then remove the pantry sliders by two screws by using your nut driver. Reverse these steps for reinstall. Then place completed unit into refrigerator, by clipping the back vent control, don't forget the square foam gasket. Then slide the pantry end cap into place, pay attention to the front of the end cap as you may need to slide into the clip to lock in place. Then screw in the three screws, careful not to tighten to much, as it might crack.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Pantry End Cap - Right Side

Part Number: PS2365144

In Stock