Replace Door Gasket

ApplianceKelvinator Refrigerator

ModelUNKNOWN

Level of DifficultyDifficult

Time to do repair1- 2 hours

Age of ApplianceMore than 10 years

Tools Screw drivers
Socket set

Simon From Boca Raton, FL

Jun 18, 2012

First I removed the inner door which was easy and used a drill with a hex head driver to undo all of the screws behind the gasket. Trying to fit the new gasket on was a fidely nightmare. It's not too bad to get the sides on but the corners are very difficult. At first I had left the door on the fridge after an hours worth of swearing I took the door right off and laid it flat on a table. When I finally got the gasket all on, with a couple od small tears, I hit it with a heat gun and got most but not all of the wrinkels out. When I put the door back on the fridge it wouldn't close properly - gaps in the gasket. I leaned some weights against the door and it the gasket with the heat gun again. Gradually over 2 days it fit fairley well.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Door Gasket

Part Number: PS428571

$80.98
In Stock