No Heat.

ApplianceRoper Dryer


Level of DifficultyA Bit Difficult

Time to do repairLess than 15 mins

Age of Appliance5 - 10 years

Tools Nutdriver

Solon From Turners Falls, MA

Jun 14, 2012

The repair was simple, and easy. And would be for any of the parts related to the issue of "no heat" or "not enough heat", however I had never used a multimeter before, and the learning curve was not simple. I ended up ordering a total of four parts, three of which weren't needed in order to perform this repair. Replacing the defective part was very easy. I wish I had been able to find better instructions on the internet or the Partselect website on how to use a mulitmeter to diagnose which part was broken. This would have saved me a couple of days waiting for the correct parts and hours of internet searching for clear instructions. It turned out that the main issue was that some of the parts needed to be checked for continuity and some for resistance. Not knowing which meant a lot of trial and error before I was able to figure out which part was broken. In fact, I really was only able to figure it out AFTER i had the new parts and was able to test the new ones next to the ones in the dryer and see which didn't read the same on the multimeter.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Thermal Cut-Off Kit

Part Number: PS334299

In Stock