Low water output & Vibration at Filter

ApplianceGeneral Electric Refrigerator


Level of DifficultyReally easy

Time to do repair30 - 60 mins

Age of Appliance1 - 4 years

Tools Nutdriver

Ray From Sarasota, FL

Jun 06, 2012

Removed plate on back top of fridge, removed filter and cover then removed 2 screws inside, removed cover at bottom of fridge removed water line going into solenoid, removed water intake line from wall and pulled filter assembly out of fridge. Install just did reverse one note there is a caulk around the lines in the back of the fridge peel that out and save it and once hoses are back in place press the caulk back into place around the hoses. DOUBLE check the part you order I mistakenly ordered the one with a male end on the intake line and needed a female end was easy fix with a compression fitting though. Apparently sediment accumulates in the assembly on the intake side so it will not give the filter enough water to distribute and there is NO way to clean it out.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Water Filter Head with Tubing (Now subbed to Water Filter Head and Tube Assembly)

Part Number: PS10056099

In Stock