Plastic pegs holding bin cover broke off on both sides

ApplianceAmana Refrigerator

Model

Level of DifficultyEasy

Time to do repair30 - 60 mins

Age of Appliance1 - 4 years

Tools Screw drivers

Roberta From St. Louis, MO

Jan 12, 2008

4 out of 4 people found this instruction helpful

Not a bad job at all. Took out the vegetable bins above, the glass cover and the sliding drawer. Then took out the screws holding the end caps on to the refrigerator wall. You can remove the metal slide at this time or after you take the old piece out. Then you re-install the metal slide on the new piece and screw it back in. THe right hand side is trickier because you also have to remove the mechanism in the back that controls the humidity inside the bin as well as the control lever in the front, so that you can install them on the new end cap. All the parts either snap on or you have to twist them slightly. We repaced both end caps as well as cleaned things really well in about 45 minutes, with 2 adults and a 10 yr old working together.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

USE WPL 12656019 (Now subbed to Pantry End Cap - Right Side)

Part Number: PS2365144

$18.86
In Stock

USE WPL 12656106 (Now subbed to Pantry End Cap - Left Side)

Part Number: PS2365151

$19.18
In Stock