No oven heat

ApplianceGeneral Electric Range


Level of DifficultyReally easy

Time to do repair15 - 30 mins

Age of Appliance5 - 10 years

Tools Nutdriver
Screw drivers

Joseph From Laguna Woods, CA

May 10, 2012

***<<< TURN POWER OFF >>>*** - remove screws in back on rear panel - remove screws that hold power wires to element-clip wires with (whatever you chose to do so)-remove old element - Reverse procedure to install - turn power on - turn stove on - keep Brother In Law from testing element with fingers! lol - Set temp - use thermometer to check temp at medium heat - Adjust temperature at back of knob if needed ( loosen two screws in back of the knob, twist the knob to adjust temp + or - 100 degrees at 50 degree intervals) - done. Easy as pie and the stove is like new.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Bake Element - 240V

Part Number: PS249424

In Stock