Pump was leaking and agitator directional cogs were woorn out

ApplianceWhirlpool Washer

Model

Level of DifficultyReally easy

Time to do repairLess than 15 mins

Age of ApplianceMore than 10 years

Tools Pliers
Screw drivers
Socket set

Timothy From Murfreesboro, TN

Jan 10, 2008

1 out of 2 people found this instruction helpful

For the pump I disconnected the power supply and supply hoses, then I laid the washer down on its back on some towels then disconnected the small and large pump hoses with pliers then released the 2 pump locking tabs with my fingers then removed the old pump then installed the new pump in reverse order, then stood the washer back up then reconnected the supply hoses. For the agitator directional cogs I removed the adgitator cap cover with a screwdriver then removed the upper adgitator assembly then removed the old directional cogs and installed the new ones and reinstalled the assembly in reverse order. Total time 8 min total cost $57 Wifes expression "Priceless"

P.S. The standard older whirlpool and roper washers and dryers are pretty easy to replace most any part. This is the 1st required repair on the washer in over 10 years. The dryer has required a timer and one heating element.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Direct Drive Water Pump

Part Number: PS342434

$29.84
In Stock

Agitator Directional Cogs

Part Number: PS388034

$3.61
In Stock