Tub seal leaking water.

ApplianceMaytag Washer


Level of DifficultyA Bit Difficult

Time to do repair1- 2 hours

Age of Appliance5 - 10 years

Tools Nutdriver
Screw drivers
Socket set

Ryan From Ida Grove, IA

Mar 18, 2012

unplug machine, Remove front cover. Lift the top up and back. Take off the plastic spin basket top. Remove the aggitator. Remove the mounting stem nut, set screw, and remove the spin basket. Remove the mounting stem. Unbolt the three tub support brackets. take off the bleach dispenser hose, the pump hose, and the water level sensor. lift out the tub. push out the old seal and bearing. Clean everything and install the new seal. Reinstall the tub including the mounting stem seal. replace the spin basket. replace the plastic top. Hook up all the hoses. Replace the top. Cycle the machine and check for leaks before replacing the front cover.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Tub Bearing Kit

Part Number: PS2347235

In Stock