ice tray wouldn't fill with water

ApplianceKenmore Ice Maker

Model106.55532400

Level of DifficultyReally easy

Time to do repair30 - 60 mins

Age of Appliance5 - 10 years

Tools Nutdriver
Screw drivers
Socket set

Ken From garden city, ID

Mar 11, 2012

I shut the water relieved the water pressure. unplugged the refrigerator removed the electronic control board and emitter.there was one screw i took off on the right rear side of the ice maker to remove a wire connector cover .then on the left front bottom side of the ice maker assembly i took a flat head screw driver gently pushed up on the plastic clip and it pulled straight out disconnected the wiring harness put the new icemaker control motor assembly in.put the assembly back in.the new emitter and receiver boards in turned the water and power back on.it took about a hour before the ice tray filled up with water and started doing it's thing very easy fix.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Electronic Control Boards - Emitter and Receiver

Part Number: PS557945

$83.96
In Stock

Icemaker Control Assembly

Part Number: PS2341896

$72.18
In Stock