Depending on your model number, this spray arm is either the upper arm or center arm.
How Buying OEM Parts Can Save You Time and Money
Part Videos
Replacing your Frigidaire Dishwasher Spray Arm
Troubleshooting
This part fixes the following symptoms:
Not cleaning dishes properly | Leaking
This part works with the following products:
Dishwasher.
This part works with the following products:
Frigidaire, Kenmore, Gibson, Crosley.
Part# 154313601 replaces these:
AP2109312, 419444, 154250501
Customer Repair Stories
Average Repair Rating: 5.0 / 5.0, 1 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Upper spray arm kept falling during cycle
Place spray arm into receptacle. Take nut and screw on being careful not to over tighten. This will strip the spray arm and the same problem will occur. Easy fix!
Ask our experts a question about this part and we'll get back to you as soon as possible!
5 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Michael
August 27, 2017
The upper spray arm keeps falling off. There is a small plastic nut that appears stripped. What part would that be?
For model number PLDB999AC0
Hi Michael,
Thank you for your inquiry. The spray are on the very top of your dishwasher is actually referred to as your nozzle on this appliance. I have attached the part that you will need to replace as you cannot get the locking nut separately from the entire upper nozzle. Good luck.
How can I clean under the round mesh under the bottom spray arm
For model number FDBC45BAB2
Hello Karen, Thank you for the question. You will need to unscrew and remove the lower spray arm. Pull out the Drain Trap, Spray Arm Support and the filter base. This will allow you to remove the filter and clean it. Hope this helps, good luck with this repair!
Was this helpful?
Thank you for voting!
Diana
October 16, 2019
Hello, does this part come with the nut needed to attach the upper arm? I see that nut is also sold separately. I’m pretty sure it is the arm that is stripped not the nut but just in case. Tks. Great service.
Hello Diana, thank you for your question. The Nut is sold separately from this Spray Arm. We would need the model number for your dishwasher to locate the correct replacement Nut. We look forward to hearing back from you!
Was this helpful?
Thank you for voting!
Marsha
March 7, 2023
Does the lower spray arm come apart to clean inside ii??
For model number FFBD2407LSOB Frigidaire dish washer
Hello Marsha, thank you for contacting us. We are providing you with a relevant video that will help you in removing the lower spray arm. We hope this helps, good luck with this repair!
Was this helpful?
Thank you for voting!
Jackson
December 31, 2017
Nothing on the top-rack (glasses & cups) is getting washed. It seems like the upper water-spray isn't functioning.
For model number FDBI050REC0
Hello Jackson, Thank you for your inquiry. I would make sure the upper spray arm is not clogged, I would also check the upper spray feed tube, and the nozzle. Hope this helps!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
