The upper rotor mount broke off.

ApplianceKitchenAid Dishwasher

ModelKUDR24SE

Level of DifficultyA Bit Difficult

Time to do repair1- 2 hours

Age of ApplianceMore than 10 years

Tools Screw drivers

George From Wayside, NJ

Jan 03, 2008

2 out of 3 people found this instruction helpful

I screwed the rack mount to the spindle using
the extra screw I ordered. I removed the upper dishrack's front stops and slid the rack
out. I clamped the mount to the dishrack. I screwed the rotor to the spindle with the screw that came with the rotor kit. I slipped the feed tube mount over the end of the tube and clamped it on the dishrack. I replaced the rack in the slides and replaced the front stops.

I had a hard time driving the screws. The slots are crossed but do not seem to be standard Phillips. The screws were hard to drive into the holes in the hard plastic. Before I could drive the mount screw all the way, the slot was too stripped to use.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Middle Spray Arm Kit

Part Number: PS382824

$26.57
In Stock

Upper Spray Arm Mount (Now subbed to Upper Spray Arm Mount)

Part Number: PS393037

$3.81
In Stock

Upper Spray Arm Mounting Bracket (Now subbed to Upper Spray Arm Mount)

Part Number: PS734018

$3.81
In Stock

SCREW (Now subbed to USE WPL 8533889)

Part Number: PS3497368

$3.82
In Stock