Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Joann E - February 22, 2023
Verified Purchase
So easy but pricey
I panicked when the plastic around the screws cracked and the vent fell on the floor. I calmed down and found your site to order the new grille. It was here in three days and so easy to put on. Thankfully good as new. A little pricey though.
★★★★★
★★★★★
Kenneth L - December 16, 2022
Verified Purchase
Easy repair
My appliance is back in working order
★★★★★
★★★★★
John C - July 22, 2021
Verified Purchase
Easy Repair with a quality part.
The part came fast and exactly as described. It was easy to connect by inserting tabs on the bottom and attaching two screws on the top.
★★★★★
★★★★★
Donald T - March 17, 2021
Verified Purchase
Thanks so much for a great part
Thanks...this was the fastest easiest way to replace an appliance part..,best ever!
★★★★★
★★★★★
Richard E - January 30, 2019
Verified Purchase
Easy Repair
The vent grille was a 10 minute fix. That's my kind of Saturday project.
★★★★★
★★★★★
Grace S - January 14, 2019
Verified Purchase
Easy as pie!
This great grandmother of 7 had the vent grille out of the box and installed in less than 3 minutes. Only needed a screwdriver and a step stool!
★★★★★
★★★★★
Chris D - January 7, 2019
Verified Purchase
Excellent match - did the trick
So grateful to easily find the piece that was needed, receive it so quickly, and have a perfect match. Thank you!
★★★★★
★★★★★
Lloyd G - August 9, 2018
Verified Purchase
Grille replacement for Microwave
I received a new part works great,easy to replace. The bad part is metal and plastic screwed together. Thanks for the part.
★★★★★
★★★★★
Paul P - August 9, 2018
Verified Purchase
Slight improvement needed
The part arrived in perfect condition and arrived in a reasonable amount of time. There was a slight delay because it was on backorder, which I imagine is because others are having the same issue I have. A piece of the grille is plastic and overheats, resulting in breakage. I’ve had to replace this grille four times since I purchased the microwave seven years ago.
★★★★★
★★★★★
Tom C - June 22, 2018
Verified Purchase
Easy repair
This was an easy fit because the failure that occurred on the original occurred on the part and not on the mounting spaces on the microwave; i.e. there are 3 tab slots on the microwave that the bottom of this part fits into (tabs on the part), and there are two screw tabs with sheet metal screw holes on the microwave, and two plastic tabs with screw holes on the part. The screws go through the tabs on the part and tighten on the metal tabs on the microwave.
< Prev
1
2
Next >
Customer Repair Stories
Average Repair Rating: 5.0 / 5.0, 18 reviews.
What's this?
Sort by:
< Prev
1
2
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Upper trim piece fell off
1. Remove two screws 2. Install new part 3. Replace two screws
George S from LEWES, DE
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Brittle, plastic mounts broke,Vent fell when cleaning
Removed remaining plastic around 2 screws. I recommend a Magnetic Phillips Screwdriver, screw holes are a little Offset, and mount screws are small. I used Needle Nose Pliers to hold screw, to get it started. Really simple install.
Robin from AUBURN, AL
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers, Screw drivers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Replaced vent grill.
Took this great-grandmother of 7 less than 3 minutes. Only needed a Phillips screwdriver. Easy as pie!
Grace from WOODSTOCK, GA
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Replace vent grille
Set in place and installed 2 screws. Took less than 5 min.
Kathleen from ROY, WA
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
2 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Plastic holders cracked causing the Vent Grill to completely separate from th Microwave.
Repair took kess than 5 munutes.. Align plastic guides for the Screws and using a Philips screwdriver commence to tightening same .
Vince from LAHASKA, PA
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Easy fix
The part is held in place with two screws. A poor design for sure. The replacement part is a direct fit once the two screws are removed. Reuse the same screws, don't order new ones.
Hild, from STRONGSVILLE, OH
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The vent grille brackets were broken.
It's a good thing that the repair/replacement is easy, because this is the 3rd time that I have had to replace the vent grill. They are very cheaply constructed and KitchenAid should be ashamed to put a product this inferior on the market. Both the microwave and stove are a constant source of problems and repairs. I was amzed at the qui
... Read moreck service and delivery. The vent grill was ordered on Monday and arrived Wednesday. GREAT SERVICE! Kitchen Aide should take notice.
Read less
G. Vann from Ft. Lauderdale, FL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
23 of 24 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The 2 molded plastic holes that accept the bolts broke.
A Phillips screwdriver was all that was needed. A poor design by KitchenAid for only having (2) bolts holding this stainless steel vent grille in a plastic housing, oh well. Don't lean or pull against it to hard or it will most likely break again.
CAMERON from WILLIAMSBURG, MI
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
9 of 10 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
broken plastic attachment for vent grill cover
Replacement of new vent grille took less than 5 minutes. I just wished Kitchen Aid made a product that lasted longer than 3 years. My part arrived very quickly, less than a week. Service was great and so was your price. I had no problem locating a replacement part. Kitchen Aid would not give me the parts number so I did not know if I was
... Read moreorder the right part. But you photo really helped to narrow the correct part. Thanks
Read less
judith from holland, PA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
2 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Vent above microwave fell off
It was so so easy. Took the two screws out, lined the new vent up with the holes, screwed the screws back in. Done!!!
Margie from Chicago, IL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
11 of 12 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
2
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
2 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Kathy Smith
August 4, 2017
Can you please give me the dimensions for the vent grille for a microwave? Thanks, kathy
For model number W10250593
Hi Kathy,
Thank you for the inquiry. This part is approximately 30" x 3.5". I hope that helps!
4 people found this helpful.
Was this helpful?
Thank you for voting!
Paul
February 3, 2020
Can the black plastic insert be purchased separately for the top exhaust trim piece?
For model number Ykhms1850ss
Hello ,Thank you for your question. Unfortunately the grille is not sold separate it is all one piece. However the black grille is not being sold any longer and we cannot get it, I apologize. There are no part substitutions listed. My suggestion here would be to call the manufacturer and see if they can provide you with a substitution for these part numbers. We hope this helps.
2 people found this helpful.
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
