repeated F7 error code on bottom oven, no buttons working, flashing self clean mode

We removed the old panel by unscrewing the 3 secrews on the bottom of the panel. Then a couple more screws also on the bottom to separate the panel assembly from the control box with all the wires attached it it.

Then we jiggled and lifted up on the panel to separate it from the oven.

The only connection that had to be removed from the old panel was the flat ribbon cable. We reconnected that to the new panel, and reattached all the screws, turned on the power again, and it works!

We figure that we saved about $250 by doing this ourselves.

I was very happy with the service and courteousness of the telephone salesperson. Hopefully nothing else will break in our kitchen, but if it does, we'll be back to PartSelect!