Dishwasher was taking way too long to go through its normal cycle; the indicator lite did not advance to DRY.

ApplianceKitchenAid Dishwasher

ModelKUDK031tWH3

Level of DifficultyReally easy

Time to do repair15 - 30 mins

Age of Appliance5 - 10 years

Tools Screw drivers

Robert From Burlington, NJ

Dec 27, 2011

47 out of 55 people found this instruction helpful

Remove just the 6 Phillips screws holding the control panel assembly to the top of the door. Panel lifted off, clearing the latch assembly. Rested it on my knees as I sat in front on a chair. Control board is right there. Wiring plugs easily pulled off the old board. Their locations are clearly marked on the board by wire colors. Removed screws holding old board, replaced with new one, plugged wires onto the new board. Screwed the control panel back on the door, being careful to clear the door latch assembly. Ran the dishwasher through a test cycle (time not included in the repair)and it works like new. Probably saved $150. in labor service charge.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Electronic Control Board

Part Number: PS1956883

$112.92
In Stock