No lights on control panel - Oven worked

ApplianceJenn-Air Range

Model30400W

Level of DifficultyReally easy

Time to do repair15 - 30 mins

Age of ApplianceMore than 10 years

Tools Nutdriver
Screw drivers

Ralph From Louisville, KY

Dec 27, 2011

0 out of 1 people found this instruction helpful

My electrical engineer son was skeptical of my diagnoses and wanted to be there so I didn't electrocute myself. Opened oven door so interior light came on. Went to circuit box and opened proper circuit (previously determined). Light went off. Started timing,removed 7 seven screws, I held the panel while my son removed the wires from connections. I expected the long multi-wire to release from the panel, but only a part of it came up when we squeezed the ends which released the wires. Removed four hex-head screws, put new panel in place, re-installed screws, inserted multi-wires into connector, connected the other two wires, re-installed the 7 screws, closed circuit breaker. 17 minutes. Set clock. Works like a new one. It appears the display unit lost vacuum. One small black spot like a burned incandecent filament. Engineer was impressed.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Electronic Clock Control Board

Part Number: PS2077361

$314.75
Recycling Rebate Available
In Stock