Was not drying properly. Making a rubbing noise metal to metal sound.

ApplianceAdmiral Dryer


Level of DifficultyA Bit Difficult

Time to do repair1- 2 hours

Age of Appliance1 - 4 years

Tools Nutdriver
Screw drivers

David From Pasadena, MD

Dec 20, 2011

4 out of 4 people found this instruction helpful

First had to remove the front panel after lifting the top up on its hinges and supporting it. Diconnected wires to the front panel after marking them where they go. Saw where drum was rubbing above the impeller housing for the fan. Removed the drum slides and replaced them with new slides and brackets. Removed the belt and replaced it. It is a little tricky with the belt on the tensioner so pay close attention on how you remove it, it will make putting the new one on easier.Replaced the felt gasket with high temp glue. Cleaned inside and outside of cabinet. Put the panel back on,hooked up the wires and it looks and runs like new again.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Cylinder Glide Bracket

Part Number: PS2039403

In Stock

Cylinder Felt Seal

Part Number: PS2039485

In Stock

Drum Glide

Part Number: PS2039613

In Stock

Multi-Rib Belt

Part Number: PS2041323

In Stock

High Temperature Adhesive - 2oz.

Part Number: PS2196040

In Stock