Oven door would not close tightly.

ApplianceJenn-Air Range


Level of DifficultyReally easy

Time to do repair30 - 60 mins

Age of Appliance5 - 10 years

Tools Screw drivers

Daniel From Rochester Hills, MI

Dec 07, 2011

7 out of 11 people found this instruction helpful

DOOR HINGE: Lifted the door out of place and layed it on the floor. Removed the six screws (three on top and three on bottom) from the door to remove the front panel exposing the hinges. Removed three screws from each hinge to remove them. Reversed the process to complete. HINGE BRACKET: Would recommend replacing these with hinges. After removing the screws that hold the oven in I pulled the oven out about four inches. Brackets are now easily removed and replaced, two screws each. Slide the oven back resecure and your done. DOOR GASKET: Just pulled it out and snapped in the new.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Door Gasket

Part Number: PS2077485

In Stock

Door Hinge - Left or Right Side

Part Number: PS2087650

In Stock

Hinge Bracket - Left or Right Side

Part Number: PS2088650

In Stock