ApplianceJenn-Air Range
Model
Level of DifficultyReally easy
Time to do repairLess than 15 mins
Age of ApplianceMore than 10 years
Tools
Screw drivers
Phliip From Scituate, MA
Dec 21, 2007
3 out of 3 people found this instruction helpful
|
I removed the burner knobs, unscrewed the 2 screws and removed the cover. I pulled the old switch off the stem and removed the wires. I reconnected the wires to the new switch and pushed it in place on the stem. After checking to make sure the new igniter switch worked, I replaced cover tightened the 2 screws and replaced the knobs. Job done in 5 minutes!