Water leak at bottom of tub, leaking onto floor.

ApplianceMaytag Washer


Level of DifficultyA Bit Difficult

Time to do repair1- 2 hours

Age of ApplianceMore than 10 years

Tools Nutdriver
Screw drivers

Brian From Allentown, PA

Nov 16, 2011

1 out of 2 people found this instruction helpful

Repair not that complicated. Remove front, lean top back, remove agitator, remove special nut, remove inner tub, remove seal. Clean shaft and seal surfaces. It is highly recommended to the spanner wrench to remove the special nut. It appears one can do it with a punch and hammer, but the nut is too tight, and corroded from years of water exposure. I believe part number is TJ90TB123A, about $15. Watch the video on this web site, very good.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Spring Retaining Clip

Part Number: PS2019681

In Stock

Mounting Stem/Tub Seal Kit

Part Number: PS2351899

In Stock