lcd on sharp r1514 mircowave was illegible

ApplianceSharp Microwave


Level of DifficultyA Bit Difficult

Time to do repair15 - 30 mins

Age of Appliance5 - 10 years

Tools Screw drivers

Stephen From Brisbane, CA

Nov 15, 2011

1 out of 2 people found this instruction helpful

Normal phillips screwdriver used for everything. Unplug microwave, remove top grille (3 screws in grille), remove 1 screw from just above and to the right of the display. Lift panel up, and replace with new board. Have to unplug about 7-8 items and a strip. Would be able to do again in less than 10 minutes, but first time took about 20-25 minutes after spending a couple of hours researching. (some of the research was misleading as you DO NOT have to take the microwave down from range if just accessing control panel)

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability


Part Number: PS2385994

In Stock