The microwave would no longer heat

ApplianceGeneral Electric Microwave

ModelJE216SF03

Level of DifficultyA Bit Difficult

Time to do repairMore than 2 hours

Age of Appliance5 - 10 years

Tools Screw drivers

Linda From Warsaw, IN

Oct 27, 2011

3 out of 11 people found this instruction helpful

First I ordered and replaced the diode. That did not help. Then I ordered both the magnetron and the thermostat magnetron because I didn't know what I was doing. After I replaced those, it still wouldn't heat. So I called an electrician. He noticed I had knocked a wire loose. I connected it and the microwave worked. I reconnected the old magnetron, just to test it. It didn't work. Then I put the new one back in. It's working just fine now! It took quite a while to put everything back in place because it was a built-in. But it was a lot cheaper than getting a new microwave, even with the cost of a repair man to show me I had a loose wire!

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

THERMOSTAT MAGNETRON

Part Number: PS239709

$9.75
In Stock

Magnetron

Part Number: PS953838

$109.34
In Stock