Actuator broken

ApplianceFrigidaire Refrigerator


Level of DifficultyA Bit Difficult

Time to do repair30 - 60 mins

Age of Appliance5 - 10 years

Tools Pliers
Screw drivers

Nes From San Jacinto, CA

Oct 25, 2011

0 out of 1 people found this instruction helpful

Unplug the refrigerator, and pull it out of its place.
1) Push out the drip tray.
2) Remove three bottom screws from cover.
3) Unclip top part of cover, and pull it out. Be careful with the ribbon from the ribbon harness connected to the power board. Use scotch tape to secure to back of cover.
4)Remove three screws from module dispenser. Slightly pull out dispenser.
5)Remove broken water actuator.Two screws hold it in place to spring actuator.Unclip power end.
6)Install new water acutator.
7)If you can , do not pull out the water tube from the dispenser. If it gets pulled out, use barbecue stick to guide it in the hole, and a long nose plier.
8)Put back the three screws.
9)Snap cover in place and secure with three screws.
10)Put back drip tray.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Water Dispenser Actuator

Part Number: PS1526418

In Stock