would not stop igniting even after fire was on

ApplianceJenn-Air Range

Model

Level of DifficultyA Bit Difficult

Time to do repair1- 2 hours

Age of Appliance5 - 10 years

Tools Wrench set
Pliers
Nutdriver

Bill From Pearland, TX

Dec 16, 2007

13 out of 19 people found this instruction helpful

unplugged unit from wall, disconnected gas line, and untaped the vent. disconnect the control knobs and unplugged and removed the control unit from the main unit. pulled the main unit out from the countertop and set it on a table. disconnect the burners and spark iginiters from the main unit. undo screws holding chrome brackets and stove base, to access iginiter. disconnect wiring from igniter and the one screw, replace iginiter. reverse everything to re-install

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Iginiter (Now subbed to USE WPL 71002724)

Part Number: PS3406596

$19.96
In Stock

USE WPL 71002783 (Now subbed to SPARK MODULE 0+4 REIGNIT)

Part Number: PS8691157

$163.77
In Stock