Within 10 minutes of starting the washer, it would stop. Grreen flashing lights and F1 error code appeared.

ApplianceWhirlpool Washer


Level of DifficultyReally easy

Time to do repairLess than 15 mins

Age of Appliance1 - 4 years

Tools Screw drivers

Arthur From Linden, NJ

Oct 11, 2011

36 out of 40 people found this instruction helpful

Someone on Google suggested holding the stop button and the start button at the same time for 60 seconds as a way of by passing the problem. This did work but soon became a pain each time we used the washer.Installing the new part was super easy. Three screws hold the cover on, one screw holds the part in place and all the plug- ins are marked by color as to where they go. Pretty hard to mess it up.I did take a few digital pictures before just in case.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Electronic Machine and Motor Control Board

Part Number: PS2341877

Recycling Rebate Available
In Stock