The ice maker would not work

ApplianceKenmore Refrigerator

Model106.55529400

Level of DifficultyEasy

Time to do repair15 - 30 mins

Age of Appliance5 - 10 years

Tools Screw drivers
Socket set

Peter From Dimondale, MI

Oct 04, 2011

0 out of 1 people found this instruction helpful

Initially, I took the ice make out of the refrigerator. It required removing two screws in the service door and one on the right side under the ice maker to remove a plastic cover for the wiring. There are plastic retainers under the left and right sides of the ice maker that must be pressed to release them so the ice maker can be removed. I had to unplug the wiring at the upper right of the ice maker (the plug has clip that you can slide a small screw driver into to release it and pull the plug apart). Once the ice maker was out I removed the white cover on the left side and it exposed the module. I found the shaft that holds the gear was broken. When the part arrive, I removed the existing module (three screws) and installed the new module. I reversed the ice maker removal process.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Icemaker Control Assembly

Part Number: PS2341896

$73.62
In Stock