timer stopped moving. wouldn't change cycles

ApplianceWhirlpool Washer


Level of DifficultyReally easy

Time to do repairLess than 15 mins

Age of ApplianceMore than 10 years

Tools Screw drivers

carl From erie, PA

Sep 26, 2011

7 out of 13 people found this instruction helpful

remove control panel on top back by removing two screws on base. remove two screws in back and lift off control panel. unplug wires from timer. pull knob off shaft and remove two screws under it. timer comes out. reassemble making sure to put knob on with flat spot on shaft and knob in correct position so cycle is displayed properly. real easy job.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Washer Timer

Part Number: PS350342

In Stock