Clothes wouldn't dry completely

ApplianceWhirlpool Dryer


Level of DifficultyReally easy

Time to do repair30 - 60 mins

Age of ApplianceMore than 10 years

Tools Nutdriver
Screw drivers

Donald From Golden, CO

Sep 14, 2011

0 out of 1 people found this instruction helpful

Used a 1/4 inch nut driver to remove back and remove element and cycling Thermo. Prior to ordering parts, I looked at the instruction videos provided with each part. ding the backand 3 holding the heat control and element. The belt is a little different, you have to open the machine from the front. There are 4 screws that need to be removed. The videos show exactly what to remove and how to check belt alignment. ---- With the videos, and list of parts that could fail, you can't miss. I have ordered all of the parts to fix the cold air cycling system in our Ref/Freezer. The cost of all the parts is so minimal compared to a service call, it doesn't make sense to eliminate a few parts that they list as possible problem parts when you are not 100% positive what is causing the failure.----- The dryer works exactly like it did when it was new.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Heating Element - 240V 5400W

Part Number: PS334313

In Stock

Cycling Thermostat

Part Number: PS344510

In Stock

Multi Rib Belt - 92-1/4"

Part Number: PS346995

In Stock