Had to remove and slide out dishwasher for acces

ApplianceGeneral Electric Dishwasher

ModelGSD1100M20

Level of DifficultyA Bit Difficult

Time to do repairMore than 2 hours

Age of ApplianceMore than 10 years

Tools Wrench set
Pliers
Nutdriver
Screw drivers

JK From Arvada, CO

Sep 14, 2011

0 out of 2 people found this instruction helpful

Hardest parts were finding the right size (13/16 in) crow foot wrench to disconnect water to the inlet solenoid valve to slide the dishwasher out. Regular wrenches won't work -- the space is too tight. Very few people have the tools I have. (No directions came with the parts package.) Second hardest was realizing the rubber transition piece connects directly to the rotation spray head inside. Threaded joint mates them up. It wouldn't unscrew, so I agonized over tearing it out piece by piece (the old rubber part I was replacing), but that's eventually what I did. Probably my fault, I could have looked at the expanded parts diagram view I had printed to find the part to order. Overall not that bad a deal, but a pro should have been able to do it in an hour or two.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Lower Spray Arm Connector

Part Number: PS259553

No Longer Available