Ice dispenser Flap door would not close

ApplianceGeneral Electric Refrigerator


Level of DifficultyEasy

Time to do repair15 - 30 mins

Age of ApplianceMore than 10 years

Tools Screw drivers

theodore From garrettsville, OH

Sep 11, 2011

0 out of 1 people found this instruction helpful

Door would not close. solenoid opened it when power applied. pulled control card and one transistor was burned up. Checked to see how much current was on the base and it was normal. measured emitter base resistance and it was shorted. Ordered new board. Removed snap on face cover and the 4 retaining screws. pulled the two screws holding the card retainer in place. Pull the two control knobs off. removed the card and installed the new one. reassembled the whole thing and it is all now working. got a new transistor at radio shack and fixed the old card for a spare.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Dispenser Control Board - 2 Slide Switches

Part Number: PS304236

In Stock