ApplianceGeneral Electric Range
Level of DifficultyReally easy
Time to do repairLess than 15 mins
Age of ApplianceMore than 10 years
0 out of 1 people found this instruction helpful
(I could hold a torch on the igniter to start it, then it would work, but would not initially heat up on its own). Pull up and remove oven door. Remove racks. Remove 2 thumb screws in back of bottom plate and remove plate. Remove 1 screw on cover plate. remove 2 screws on igniter and unplug. Splice wires from new igniter to old plug with ceramic wirenuts (included). (Manufacturer changed plug design). re-install everything. (Sears wanted $80.00 for the part, Appliance Factory wanted $47.00).
Were these instructions helpful?
Part Number: PS231280