Was not getting cold water when trying to fill the washer. Was only getting the hot water

ApplianceGeneral Electric Washer


Level of DifficultyReally easy

Time to do repairLess than 15 mins

Age of Appliance5 - 10 years

Tools Nutdriver
Screw drivers

Rocky From Palmetto, FL

Aug 31, 2011

1 out of 2 people found this instruction helpful

Replaced the Dual Water Inlet Valve. Took about 15 minutes to take the old one off and put the new one back on. the cold water started comming out like it should,it also seemed to have more pressure and filled faster. We have had the washer for over five years and it seemed that it took forever for it to fill when we did a load. So by replacing the valve it fixed the problem of no cold water comming out and the slowness of filling. It seems to be filling faster.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Dual Water Inlet Valve

Part Number: PS1155105

In Stock