actuator was easy to install. the problem was reconnecting the water supply line to the frame. a friend with small hands was a great help.

ApplianceFrigidaire Refrigerator

Modelfrs6l7eesn

Level of DifficultyA Bit Difficult

Time to do repair30 - 60 mins

Age of Appliance5 - 10 years

Tools Pliers
Screw drivers

Rosemary From Palm Beach Shores, FL

Aug 30, 2011

1 out of 2 people found this instruction helpful

removed water tray then pushed up on face cover, three screws on bottom of frame allowed removal by tilting down and gently pulling unit out,being careful not to pull ribbon strip out of face plate. you then could see the two screws covering the acuator pivot pins, remove them and unplug actuator from board. install new actuator and plug it into the board you will then have to put the water supply line back in the frame hole which gave me the only difficulty take a few deep breaths and a little time and it can be done. push the frame into place replace the three screws then the face plate,water tray and finally plug the refrigerator back in. mission acomplished.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Water Dispenser Actuator

Part Number: PS1526418

$80.57
In Stock