I snapped a bolt on the main power terminal block when connecting the pigtail.

ApplianceKitchenAid Range

ModelPS986677

Level of DifficultyEasy

Time to do repair15 - 30 mins

Age of ApplianceLess than 1 year

Tools Screw drivers
Socket set

Frank From Palm Coast, FL

Aug 24, 2011

3 out of 4 people found this instruction helpful

Removed the small metal panel covering the main power terminal in back of the electric range. Removed the nuts holding the red, white and black electrical wires from the range using the appropriate socket (there will be two nuts on each bolt end). Removed the two screws holding the main power terminal block with appropriate screw driver. Connect the new main power terminal block to the range using the two screws. Reconnect the red, black and white electrical wires coming from the range using one nut for each wire. IMPORTANT: do no over tighten the nuts because the bolts could snap. Reconnect the pigtail and secure the small metal panel covering the main power panel.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Main Power Terminal Block

Part Number: PS986677

$11.09
In Stock