Dryer would not heat up.

ApplianceWhirlpool Dryer

Modellet5434aqo

Level of DifficultyReally easy

Time to do repairLess than 15 mins

Age of Appliance1 - 4 years

Tools Nutdriver
Screw drivers

Jeffery From Cincinnati, OH

Aug 20, 2011

0 out of 1 people found this instruction helpful

First I unplugged my dryer. (220v) I then layed the dryer on its front. I then proceeded to remove the back cover after removing the duct clamp. The two screws holding the Cycling thermostat was removed after the two wire connections were slipped off. I placed the new cycling thermostat in place and put everything back in place and behold...Heat! This was a simple job for even the somewhat clumsy repair person. Good luck and Thank you Partselect! P.S. my order was placed on Friday and it was on my doorstep Saturday morning.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Cycling Thermostat

Part Number: PS344510

$15.59
In Stock