Electronic display was too dim to read and the top baking element was burned out.

ApplianceJenn-Air Range

Model

Level of DifficultyReally easy

Time to do repair15 - 30 mins

Age of Appliance1 - 4 years

Tools Nutdriver
Screw drivers

Tom From Elba, AL

Dec 08, 2007

5 out of 6 people found this instruction helpful

I removed two screws to take the control panel off.
The electronic display is held in place with four screws which are easily removed with a nut driver.
The wiring work is extremely simple.
To replace the element, I removed the oven racks, took two screws out, disconnected the two wires, then replaced the element by reversing the process.
Both jobs took less than 20 minutes and that includes two trips to the breaker box in the basement.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Electronic Clock Assembly (Now subbed to Electronic Clock Control Board)

Part Number: PS2078453

$289.75
Recycling Rebate Available
In Stock

USE WPL 71001636 (Now subbed to USE WPL W10314692)

Part Number: PS2375653

$48.38
In Stock