agitator nylon cogs (dogs) worn out

ApplianceKenmore Washer

Model110.26904691

Level of DifficultyEasy

Time to do repair30 - 60 mins

Age of ApplianceMore than 10 years

Tools Screw drivers
Socket set

Steve From Decatur, GA

Aug 18, 2011

0 out of 1 people found this instruction helpful

Instructions and videos were not entirely accurate for this repair on this Whirlpool/Kenmore model. After removal of the agitator cap, there was a retainer spring that needed to be removed with a 1/2 inch socket extension. After unscrewing this retainer holder, the holder for the agitator dogs was visible inside of the top of the agitator auger. The agitator auger just lifted off--it was NOT necessary to remove the screw holding the agitator assembly.
The new agitator dogs assembly just dropped into the top auger agitator. Drop the retainer spring into the auger agitator and tighten with the 1/2 inch socket extension, replace the agitator cap, and you are done.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Agitator Repair Kit

Part Number: PS334650

$17.87
In Stock