The spray arm hose developed a hole in it and wasn't cleaning the upper tray well anymore

ApplianceKitchenAid Dishwasher

ModelKUDS24SE

Level of DifficultyEasy

Time to do repair15 - 30 mins

Age of Appliance5 - 10 years

Tools Pliers
Screw drivers

Elliot From Oceanside, NY

Dec 08, 2007

0 out of 2 people found this instruction helpful

I removed the old spray arm, using a screwdriver and plier. I found it easier to do this after I removed the whole upper tray, which I was able to do after popping out the cotter pins on both sides of the tray and turning the tray upside down. Then I installed the new spray arm kit, using just a screwdriver (it only goes in one way), reinstalled the tray and cotter pins and was done. One caution, make sure the clip holding the hose is mounted exactly where it should be or the new spray arm will not spin. Just check to make sure it spins properly.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Middle Spray Arm Kit

Part Number: PS382824

$28.56
In Stock