The Drain shaft seal was leaking.

ApplianceGeneral Electric Dishwasher

ModelGSD4330Z02WW

Level of DifficultyA Bit Difficult

Time to do repair30 - 60 mins

Age of ApplianceMore than 10 years

Tools Wrench set
Nutdriver
Screw drivers

George From Salem, VA

Aug 16, 2011

2 out of 4 people found this instruction helpful

The solenoid and linkage was easy to disasemble, but getting the retainer (push on nut) off was difficult without removing the motor and pump. Once removed it was a snap. Getting the pump/motor back onto the pipes was near impossible from underneath. I had to remove the dishwasher from under the countertop to get it back correctly. I would reccomend doing this for this repair, as it made life a lot easier. Unwiring and removing the water supply line was not a problem either. WORKS AS GOOD AS NEW!

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Drain Valve Shaft Seal

Part Number: PS263930

$16.89
In Stock

Corner Tub Baffle - Lower Right

Part Number: PS263963

$7.02
In Stock

Corner Tub Baffle - Lower Left

Part Number: PS263964

$7.02
In Stock

Push On Nut

Part Number: PS298353

$2.79
In Stock