Squeeking as drum turned.

ApplianceGeneral Electric Dryer

ModelDRSR483ED1WW

Level of DifficultyEasy

Time to do repair30 - 60 mins

Age of Appliance5 - 10 years

Tools Screw drivers

Eric From Gardner, KS

Aug 07, 2011

0 out of 1 people found this instruction helpful

First I unplugged the dryer. Then opened the door, removed both screws on top in opening. Then pulled up the top of the dryer and removed two screws, one on each side of dryer and pulled the front off the dryer.
I removed the door light from drum bearing housing and pulled off the old drum bearing. I took the new drum bearing, installed the 4 new drum slides onto the drum bearing housing. 2 front dryer drum slides and 2 drum slides. Then snapped it into place and reinstalled the door light. I then vaccumed out the dryer, re-installed the front of the dryer and secured it with one screw on each side, pushed the top back down and screwed in the two screws in the top of the door opening. Job completed, it was fast and the squeek is gone.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Front Dryer Drum Slide (Now subbed to Drum Bearing Slide - White)

Part Number: PS755842

$6.53
In Stock

Front Drum Bearing

Part Number: PS960316

$18.13
In Stock

Dryer Drum Slide (Now subbed to Drum Bearing Slide)

Part Number: PS6447706

$3.86
In Stock