Dishwasher started but stayed at one place in the cycle

ApplianceMaytag Dishwasher

ModelMDB4100AWX

Level of DifficultyReally easy

Time to do repair15 - 30 mins

Age of Appliance5 - 10 years

Tools Screw drivers

Charles From Middletown, OH

Dec 06, 2007

2 out of 3 people found this instruction helpful

First I removed the 7 torx screws holding the inner door panel to gain access to the timer. There is a plastic cover over the timer to be lifted out ot the way then you can access the 3 screws holding the timer in place. Pull the timer dial off the front then remove the 3 screws. Disconnect the 2 electric plugs and the single ground from the timer. Don't get shocked. Hook the ground wire and the 2 harnesses, screw the timer in place, replace the shield, reinstall the inner door with 7 torx, push the timer dial back in place, and go for a test run.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

USE WPL 99002057 (Now subbed to Timer)

Part Number: PS2099464

No Longer Available