Drawer slide was broken

ApplianceGeneral Electric Refrigerator

ModelGSS25JETAWW

Level of DifficultyReally easy

Time to do repairLess than 15 mins

Age of Appliance1 - 4 years

Tools Screw drivers

Lester From Pascagoula, MS

Jul 29, 2011

0 out of 2 people found this instruction helpful

Remove the drawer and the shelf glass assembly. using a #2 phillips screwdriver remove the two screws that hold the drawer slide rail. Discard the old slide and place the new slide in position and install the two screws. Be careful not to over-tighten the screws. Place the drawer back on the slide and close it. Next place the front of the glass shelf under the lip on the front of the slide rail and set it in place. Job Complete!

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Drawer Slide Rail - Left Side

Part Number: PS306943

$15.92
In Stock