One side of the door spring link was broken.

ApplianceKitchenAid Dishwasher

ModelKUDS01FLSS3

Level of DifficultyEasy

Time to do repair30 - 60 mins

Age of Appliance5 - 10 years

Tools Pliers
Nutdriver
Screw drivers
Socket set

Don From Dana Point, CA

Jul 29, 2011

1 out of 2 people found this instruction helpful

I've had to do this repair at least twice before over the last few years so I stand by my original assertion that the door "balance link kit" reflects very poor design. Well, maybe the design would be okay if the materials were not prone to breakage. However, a simpler spring-only mechanism would have been more reliable. The current design uses string embedded in plastic that latches to a hook area for both sides of the door (frame). The string is threaded around a hub and then to a spring that is in turn connected to the chassis at a rather distant point which also adds to the difficulty due to requiring greater access to the dishwasher sides. It would be much better if the repair could be done without necessitating removal of the entire unit from the cabinet cavity first. I noted that this time around there's been a redesign so that the hub is no longer a round fixed knob but now includes a rotatable wheel. So perhaps there'll now be less wear on the strings that with the prior design! -- D.A.D

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Door Balance Link Kit

Part Number: PS972325

$21.19
In Stock