Dryer would not start when starter switch was pushed.

ApplianceAmana Dryer

ModelNDG2330AWW

Level of DifficultyA Bit Difficult

Time to do repair30 - 60 mins

Age of Appliance5 - 10 years

Tools Screw drivers
Socket set
Wrench(Adjustable)

Steve From Hillman, MN

Jul 29, 2011

1 out of 3 people found this instruction helpful

Installed new starter switch but it turns out that was not the problem. After checking the wiring diagram I tested the door switch and found that it was faulty. I jumped across it behind the control panel and now the dryer works fine.I'll replace the door switch later. If you do has I did remember that the dryer will then run with the door open and is dangerous. My mistake was I did not check the old starter switch with the ohm meter right off, silly me.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Push to Start Switch

Part Number: PS2039436

No Longer Available