Overshooting temperatures upon changing settings

ApplianceMaytag Range

ModelMGR5720

Level of DifficultyEasy

Time to do repair15 - 30 mins

Age of ApplianceMore than 10 years

Tools Screw drivers

James From Palmdale, CA

Jul 26, 2011

11 out of 12 people found this instruction helpful

Look in the oven. On the upper left corner is the sensor. Remove two screws. Gently pull the wire and connector through the hole and insulation. Disconnect old sensor, replace new. Gently push the connection through, then finish pulling through from behind the stove. Replace the screws inside the oven. Done.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Short Oven Sensor Kit

Part Number: PS2003225

$28.56
In Stock