No action for the attachments for cutting/chopping.

ApplianceKitchenAid Small Appliance


Level of DifficultyA Bit Difficult

Time to do repair1- 2 hours

Age of Appliance5 - 10 years

Tools Screw drivers

David From Goodlettsville, TN

Jul 26, 2011

12 out of 19 people found this instruction helpful

I removed the rear cap, decorative strap, and decorative ring. Next I drove out the pin holding the mixing head. I then removed the 9 screws holding on the motor/gearing portion. This facilitated removal of the gearing from the motor assembly. I next laid in the new gears and calculated what thickness of fiber washers were needed to hold the gears in place. Reassembly was in reverse order of dissassembly.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Attachment Hub Level Gear

Part Number: PS989548

In Stock

Bevel Pinion Center Gear

Part Number: PS989663

In Stock

WASHER (Now subbed to WASHER)

Part Number: PS3418437

In Stock