Cubes not pushing out during harvest mode

ApplianceKitchenAid Ice Maker


Level of DifficultyEasy

Time to do repair15 - 30 mins

Age of Appliance5 - 10 years

Tools Pliers
Screw drivers
Socket set

Mitchell From Palmdale, CA

Jul 25, 2011

0 out of 1 people found this instruction helpful

I first determined it was the motor and not the electronics which had failed a couple years ago. I watched the video posted on your site on how to do the repair, so didn't have to make the mistake of calling a repair person so they could take two weeks to do it, and charge four times what it cost me to do it myself. The part arrived in only two days from my order. The hardest part for me was waiting for the ice to thaw that had frozen the unit to the side of the freezer. Once out, it took all of 10 minutes to remove the three screws holding in the motor, and put the new one in. As soon as I hooked it back up, and turned on the water supply and power, it filled with water and in less than an hour, was harvesting ice again. Your site is a Godsend. I felt really good about myself after this was done... as did my wife!

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Icemaker Control Assembly

Part Number: PS2341896

In Stock