Bake element wouldn't heat.

ApplianceFrigidaire Range

Model

Level of DifficultyEasy

Time to do repairLess than 15 mins

Age of Appliance1 - 4 years

Tools Nutdriver

Earl From Elkin, NC

Dec 05, 2007

1 out of 2 people found this instruction helpful

The problem was caused by the owner placing an aluminum catch pan under the bake element. The failure of the element was where it was in contact with the pan. The repair involved removing two screws pulling out the element to access the wires. The connectors were the pull off type so I just disconnected the wires from the old element and placed them on the new element, pushed the element back in place and replaced the two retaining screws. I suggested that the owner not place anything in contact with the bake element. Be sure to up-plug the stove plug before attempting repair.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Bake Element - terminal depth of 13 inches (Now subbed to Bake Element - Push On Terminals - 240V)

Part Number: PS2332301

$29.16
In Stock